Picco Coatings Enamels
13-Series Industrial Enamel
This product is a single-pack industrial alkyd coating designed to give high gloss, good weathering characteristics, and ease of application. They do not require mixing with a second component in order to achieve a durable yet decorative finish. Simply shake or stir the container and apply by brush, roller, or spray. The longer dry time of this product allows a longer “wet edge“ time so that brush and roller marks are able to flow out and spray overlap is not noticeable when coating large pieces of equipment. This product is recommended for equipment, machinery, and general maintenance applications. The dry time for 13-Series Enamels is 6-8 hours. We stock numerous oilfield, industrial, and OEM colors’
Available in 1-gallon cans, 5-gallon pails, 55-gallon drums, and 250-gallon tote tanks.
Technical Data Sheets
For Industrial Use Only
14-Series Fast Dry Industrial Enamel
This product is a single-pack industrial alkyd coating designed to give high gloss, good weathering characteristics, and ease of application with a faster drying time to increase production rates. They do not require mixing with a second component in order to achieve a durable yet decorative finish. Simply shake or stir the container and apply by conventional spray. Application by brush and roller can be challenging due to the faster dry time. Application by spray only is recommended. This product is recommended for equipment, machinery, and general maintenance applications. The dry time for 14-Series Fast Dry Enamels is 20-30 minutes. We stock numerous oilfield, industrial, and OEM colors.
Available in 1-gallon cans, 5-gallon pails, 55-gallon drums, and 250-gallon tote tanks.
Technical Data Sheets
For Industrial Use Only
50-Series Water-Reducible Fast Dry Industrial Enamel
This product is a single-pack industrial water soluble alkyd coating designed to give high gloss, good weathering characteristics, and ease of application with a faster drying time to increase production rates. This coating has a low VOC of 1.50 lbs/gal and can be thinned and cleaned up with water instead of solvent. Once the water dries out of the coating, the coating dries as fast as our 14-Series Fast Dry Enamel, but has less solvent, lower toxicity, and less VOC impact. They do not require mixing with a second component in order to achieve a durable yet decorative finish. Simply shake or stir the container and apply by brush, roller, or conventional spray. Application by brush and roller can be challenging due to the faster dry time in hot, dry weather. In this case, application by spray only is recommended. This product is recommended for equipment, machinery, and general maintenance applications, especially where VOC limitations prohibit using other conventional coatings. The dry time for 50-Series Water-Reducible Fast Dry Enamels is 30-60 minutes. We stock numerous oilfield, industrial, and OEM colors.
Available in 1-gallon cans, 5-gallon pails, 55-gallon drums, and 250-gallon tote tanks.